I bought my first B20 a few years ago and thought it was a good rifle, a little rough out of the
box, but all in all a very satisfying hunting rifle for little cash out. I took it with me on several
hunts for squirrels in the Midwestern woods and rabbits in the Southwestern deserts, and found
that it performed very well for the intended purpose.

Jump ahead a few years, and I was looking through some factory literature that had been sent to
me for an article I was working on, when I came across a notice on a rifle being readied for
release to the market. It was called the BAM XS B26, and like the B20 it was based on the
renowned Beeman R9, although the literature claimed it was a significant improvement over the
B20 due to better manufacturing and quality engineering processes, along with a couple of design
changes such as a larger chamber (25-26mm) and a much more ergonomic stock (even though the
B20 is not too bad either).

The gun was shipped to me double boxed, with adequate bubble wrap padding. Included in the box
was a 3-9x32 variable scope, a couple of Allen wrenches for mounting it, and a users manual. The
gun did not have too much oil or grease externally, and though there was a bit of dieseling on the
first few shots the gun settled in pretty quickly.

The B26-2 is a break barrel spring piston airgun which is available in .177 or .22; I selected the .
177 as this is my preferred caliber in springers. The gun is outfitted with a thumbhole stock, a
Monte Carlo cheekpiece with a rather high comb. The wood has a nice grain and is free of
blemishes or filler, and is equipped with a ventilated recoil pad. I really like the thumbhole and
pistol grip finding it allows a very comfortable grip and positioning of the trigger finger. I have to
say that the comb is a bit too high for me when the scope is attached with low profile mounts;
however this can be addressed by using a higher profile mount or removing some of the height on
the comb and reshaping it to a custom fit.

The gun is 43� in overall length with a 16� barrel capped with a muzzle brake that attaches
with two set screws. The rifle weighs 7.3 lb without the scope, but to me feels lighter as it
balances so well. I found that I could shoot this gun well from standing, prone, and sitting positions
once I’d worked out the scope mounts.

The gun features a two stage trigger with a second stage adjustment, which the manufacturers
states is a clone of the Rekord trigger. My gun is set up with a 3lb pull (which is my preference in
a field gun) that breaks cleanly without noticeable creep (don’t confuse the first stage with
creep) or over-travel. It is not exactly as crisp as a Rekord trigger, but certainly one of the nicer
triggers I’ve seen on such a low cost gun. It does benefit from a cleaning, polishing, and
application of lubrication; which is not difficult for the competent amateur gunsmith.

The gun performed quite well on the bench; I set up on my 20 yard range with the pro chronograph
about a foot from the muzzle. The gun shot well from the start, but really smoothed out after the
first tin of pellets had passed through it. The firing cycle is equal to my more expensive guns,
quite a surprise in an inexpensive import. To test performance I shot several 9 shot strings using
three pellets; Gamo Hunter, Crosman Premiums, and Predator Polymags. The highest velocities
were obtained with the hunters which averaged 970 fps, the Predator Polymags averaging 850
fps, and the CPs at 790 fps. The best 20 yard groups were achieved with the CPs that averaged
about .3â€�, though did produce a few single hole groups, followed by the Hunters at just under  .4â
€� and the Polymags at just over.

I had the opportunity to take the rifle out to hunt cottontails shortly after my bench testing, and
managed to bag a few bunnies at distances from 20 to 40 yards using the Polymags; and found that
the gun/pellet was a very effective game getter at these ranges. I liked carrying this gun in the
field, and once the scope height was sorted out with higher profile mounts, found the gun was quick
to shoulder and bring on target.

So what do I think of the B26-2? I have to say that the Chinese airgun quality seems to be getting
better with each gun that comes out. The B50 started it off as the first quality pcp produced in
Cathay, then the B40 came along to show that the improved quality extended to their springer
production, with the B26 continuing the trend. I think the B26 represents an excellent hunting
rifle at a reasonable price (the retail price is approximately $160.00 for the B26-2 and $140.00
for the B26). Another plus in my mind, is that there is a plethora of tuning information available on
the B20, which is applicable to tuning the B26. I wouldn’t be surprised if this becomes a
popular project gun. I’m going to order a couple more to start tinkering with!!
The BAM XS B26-2
Jim Chapman
The newest spring piston air rifle out of China is reviewed on the bench and in the field. This
second generation clone of the venerable R-9 is the evolutionary followup to the B20, and has
been impressing airgunner with its perfromance and value.
The stock of the B26-2 is
one of my favorite
features: the thumbhole
and pistol grip fit my hands
very well. The only negative
is that the comb is too high
to use along with the low
profile mounts used in this
picture. I swapped them
out for high profile mounts
and am now able to get a
good, comfortable sight
alignment with it.

The muzzle brake included
is a nice touch.


I obtained good results
with Gamo Hunter,
Crosman CPs, and Predator
Polymags. The highest
velocities came with the
Hunters and the tightest
groups with the CPs.

While I was getting .3"
average groups with the
CPs, I did manage a few
single hole groups as well
Even though I was able to
use the lower profile
mounts, I really had to
squash my face down to get
a sight alignment. Be sure
to get high mounts and
you'll find this one of the
most comfortable stock
springers around. I really
enjoy shooting and hunting
with this rifle, which has
become my truck gun for
the present

The B26-2 along with the
Polymags was a very
effective combination on
my rabbit hunts.